|
 |
The
Fast-Track 8000 Handler has been designed as
the ultimate machine for I.C. Handling needs. The
Fast-Track
8000 is capable of handling components stored in
multiple-medias to and from programming/test sites.
Media options for input and output include standard
and non-standard JEDEC trays, taped devices, bowl
feed/bucket and plastic/metal tubes. The Fast-Track
8000 system can be configured with multiple programming/test
sites, laser mark capabilities, differential temperature
testing, and 3D vision inspection. The Fast-Track
8000 is a versatile handler, capable of producing "finished" components. |
Operation
| The Fast-Track
8000 is designed with a JEDEC tray stacker (up to
20 trays). The machine has up to eight Pick & Place
heads to allow for quick and precise component handling.
The handler is designed to directly dock to the test
heads for easy removal of the DUT board with no need
to reposition the system. The Fast-Track 8000 has
an "easy to use" Windows based control software.
An operator can be trained to use the machine in
less than four hours. The Fast-Track System is capable
of handling up to 5000 units per hour. Please contact
Exatron for more information at 1-800-EXATRON |
The Fast-Track System comes standard with:
- Differential Temperature Testing
- Dual Pick-up Heads with 90ç Rotation
- Up to five JEDEC Tray Stackers (more available upon
request)
- All axes are Servo Motor driven
- ESD Safe
- CE Mark
- Windows Operating System
- Single keyboard/mouse with built in KVM switch to control
any additional computers
- Dual LCD Flat Panel Monitors (with Scanner Option)
- Modem with PC Anywhere for remote service and software
updates
- Tri-Color Operation Light Pole with Audio Alert
- Safety Covers and Interlocks
- Welded Steel Frame, Casters and Leveling Feet
- Multiple Emergency Stop Buttons
Options
 |
The Fast-Track 8000-V can be configured as a Hot/Cold
Temperature Tester. Using liquid heating and cooling
systems from Julabo and
a movable hot and cold test head carriage, the system
can test both hot and cold with a single placement
of the component. By placing the device in the test
socket only, the potential of damaging the leads is
prevented as a result of unnecessary handling. The
Fast-Track differential temperature system can range
from -55çC to +155çC with an accuracy of +/- 1çC. Embedded
thermocouples within the test heads measure the component
temperature and will perform testing when the specified
temperature has been reached. Typical soak times are
under four seconds. |
Scanner
Technologies provides the Inspection Module with
the Ultra Vim or Ultra Vim Plus.
True 3D Coplanarity Inspection is available for:
- SOIC/TSOP
- PLCC/LCC/MCM
- PQFP/TPQFP
- BGA/uBGA
- CSP
|
 |
 |
The system can be configured with a Trumpf Laser
Marker. The marking can be completed in tray and
no tooling is required.
Laser Specifications:
- "Red" Wavelength 1064 nm or "Green" Wavelength 532
nm
- Power 0 to 1.5 Watts
- Pulse Repetition 2 - 20 KHz
The Fast-Track can be equipped with an X-Y-Theta Precisor
Station. Working in conjunction with the Scanner Technologies
Inspection Module, the Precisor Stations guarantees accurate
component handling.
Output is to either a JEDEC Tray Stacker or a Model
1080 Automatic Taper for 8 to 72 mm tapes, PSA or
Thermal Seal. De-Tape Input can also be added upon request.
The system can also be configured with Input and Output
Tube Feeders.
Facilities
Requirements
- 110 to 240 VAC, 50/60 Hz, 5 Amps Power
May require 220 VAC, 60 Hz, 10 Amps Power for Julabo Temperature
System
- 80 PSI Minimum clean dry air
|
