Exatron Products - Vision Inspection

Exatron Products - Vision Inspection

Inspection Only - AutoScan 4000

	Product Manual
(Adobe Acrobat Reader Required)

The AutoScan 4000 Coplanarity Inspection System is designed to transfer devices from one tray to an inspection module and back or to another tray if so desired. The AutoScan 4000 Coplanarity Inspection System is designed to handle JEDEC standard trays and can inspect Gull Wing, J-lead, and Ball Grid Array devices.

Operation
The AutoScan 4000 employs a single Pick & Place with dual Pick-up Heads, allowing the transfer of two components at once. This greatly increases the productivity of the system making it capable of transferring components in excess of 2000 units per hour.

To perform the lead inspections, the AutoScan 4000 employs an UltraVim or UltraVim Plus Inspection Module manufactured by Scanner Technologies Corporation. Scanner Technologies offers two models of Inspection Modules. The UltraVim is capable of inspecting Gull Wing and J-lead devices with 3D technology. The UltraVim Plus Inspection Module is capable of 3D Ball Grid Array Inspection as well as the Gull Wing and J-lead capability of the standard Ultra Vim. Both models operate at high speed and precision without any customer calibration at any time.

There are three modes of operation available to an operator. Mode One will inspect devices and sort them placing good devices in a separate tray and returning reject devices into the supply tray. Mode Two inspects devices returns all parts back to the supply tray then posts a "map" detailing the results in a graphic display. The Third Mode is simply tray to tray transfer without inspection.

Options
Exatron offers a tray stacking version of the AutoScan 4000. Please see our section on the AutoScan 4000 Stacker.

Optional Equipment also includes modules to handle devices in tubes or Tape & Reel. This is accomplished by using Tube Carriage Modules or Exatron's Model 1080 Automatic Taper/De-Taper , which are easily attach to the AutoScan Systems. Tube or Tape & Reel capability is offered as optional equipment and must be approved for use by Exatron prior to sale of the system.

For further information call 1-800-EXATRON, and ask for Vincent.