The LaserScribe Automated JEDEC Tray (AJT) Laser Marking System is designed to mark components in a JEDEC-outlined tray. The machine is available in two styles, Single Tray or with Multiple Tray Stackers.

Operation
The LaserScribe AJT is designed with an easy to use operator interface. The machine is controlled with two programs, one to control automation and the other to control laser marking. The operator first uses the Window-style CAD marking software to design and position the mark. After the mark is set the operator turns to the automation software to teach or choose the tray matrix style. Once both programs have been configured the operator must merely select <RUN> to start the marking process.

On the Automatic System (Multiple Tray Stacker), a tray is loaded from the Input Stacker and moved into the various positions for marking. When finished, the tray is stacked in the Output Stacker. For the Semi-Automatic System (Single Tray), the tray is manually loaded in the Loading area then moved into the marking postions. The tray then is placed in the Unloading area for removal. Both systems are manufactured using extensive covers and interlocks to insure operator safety.

Every LaserScribe system is equipped with a modem and PCAnywhere software to allow remote control of the laser control computer. This allows service technicians to remotely diagnose problems with the laser, perform training, and even operate the laser from a remote location.

Options

• Automatic operation (Multiple Tray Stackers) or Semi-Automatic operation (Single Tray)
• The laser is available in four wavelengths: 1064nm("infrared") , 532nm("green"), 355nm ("UV") and 10,600nm(CO2)