- Power: 120/220 VAC 50/60Hz
- Air: 5.5 bar (80 psi) - 2 CFM clean, dry air
-No air required for ink dot mode
Units per Hour:
- Labeling = up to 2,000 uph
- Inking = up to 4,000 uph
- X gantry, XY tray, and Z pickup head are powered by servo motor-driven lead screws.
- X and Y axis resolution = 0.1 mm (0.003")
- Fits one standard JEDEC tray or 2" or 4" waffle packs in JEDEC tray frames.
- Separate label and ink dot .exe files allow relatively few settings changes.
- Windows 10-based user interface.
- Extensive built-in diagnostics.